|
|
Detailed Description
Shock hoops are used in solid axle swaps and early straight axle Toyotas. These are the hoops that come with our suspension lifts. They will work for many other vehicles. We have sold these for Suzuki, Jeep, Xterra, Toyota and many other makes.
For Toyotas they work great and don't require much, if any, mods.These are not a direct fit and may need modification. If you aren't sure these will work, check out our Build it yourself shock hoop kit. If this length isn't what you need, then Contact us and we can make you any length hoops you need.
Welded hoops are made from:
- 1 1/2 inchx.120 mild steel round tubes bent at 180 degrees
- 4-3/16" laser cut steel tabs with 1/2 inch hole
- 4-1 1/2" capped end tubes
- 4-1 inch tubes with 45 degree cut for bracing
- 2 each: grade 5 bolts, washers, and locknuts
- Tubes are notched at 15 degrees
- Fully welded
- Made by Datin fab
|
|
|
|
|
|
1/2" Bolt hole 3/16" laser cut mild steel
|
|
|
|
|